100FT Blue 1/4 Inch O.D.NSF Certified CCK RO Tubing at 70°F-120PSI to 150°F-60PSI 1/4" Flexible water pipes 1/4-inch Plastic Tubing（100 Feet)

Easy to work with.

I have a misting system in my hobby GH. I wanted to extend it and add a few more nozzles, so I initially purchased a black tubing. It was a disaster, continually pulling out of the couplings. I measured it and instead of being .250, it was .243. That 7 thousands was critical. I returned it and purchased this tubing. It measures .250. Perfect. Once inserted, I couldn't pull it out without first relieving pressure on the capture ring in the couplings, which is the way it's supposed to work. I highly recommend this tubing; you won't be disappointed.

I started using the pex tubing instead of using copper or braided lines. Some of the fridge manufacturers now require you to use pex.

Works great.. thanks

Reverse Osmosis approved tubing at a reasonable price. Plenty of tubing to install RO system with outputs to frig and sink spigot. System was installed in basement and services the 1st floor.

Good for the plastic quick push connectors but not good for brass crush washers. I used 2 brass crush sleeves and it was still leaking, so I used an old piece of hard clear line I had and couple it with the plastic push connector I had and that work. If possible I would recommend the harder clear plastic lines since its more durable and can be used with more types op connectors.

Hard to review poly line. Seems as good as any other poly line I've ever handled in my life. Currently, this will see up to 30psi on a spring assist air bag system in the back of an SUV. It also is seeing up to 110psi as it feeds supply to an air compressor kill switch. Temps on both system over a year can vary from 90+ to -10f. It cut easily, with a small tubing cutter. Accepted compression fittings without leaks, and squeezed on to a barb fitting with the help of a bit of heat. So far so good. I'll update if need be.

As listed